Washing Powder Spray Drying Tower

Washing Powder Spray Drying Tower

Details
Meibao’s spray drying tower converts detergent slurry into base powder for cooling, screening and post-blending. For new plants, Meibao sizes the tower and hot air system to suit the slurry solids content, required base powder output and target moisture content. For plant upgrades, Meibao assesses which existing pumps, hot air equipment, dust collectors and conveyors can be reused and identifies the additional equipment needed.
Category
Spray Drying Detergent Powder Production Line
 
Send Inquiry
Description
Technical Parameters

Zhejiang Meibao Industrial Technology Co., Ltd. is one of the leading manufacturers and suppliers of washing powder spray drying tower in China. With abundant experience, we warmly welcome you to buy custom made washing powder spray drying tower from our factory. For price consultation, contact us.

 

Washing Powder Spray Drying Tower

Spray drying towers that turn prepared detergent slurry into base powder for cooling, screening and post-blending.

Meibao's washing powder spray drying tower dries prepared detergent slurry into base powder for subsequent cooling, screening and post-blending. For a new line, equipment for slurry feeding, hot air, exhaust treatment and powder discharge can be supplied to match the target base powder output. For an expansion or retrofit project, Meibao reviews the available plant space and the condition of existing equipment to decide what can be retained and what needs to be added.

Large stainless steel spray drying tower during fabrication with technicians working at its base

Spray drying tower during fabrication at the Meibao workshop.

New Line

Slurry feeding, hot air, exhaust treatment and powder discharge sized to the target base powder output.

Expansion or Retrofit

Existing equipment is assessed against plant space and operating condition before the new scope is defined.

Defined Scope

The quotation separates Meibao-supplied items from equipment you supply or retain.

Scope of Supply and Connection Points

Confirm where the slurry enters and where the discharged base powder is delivered.

When defining the scope of supply, first clarify where the slurry is fed from and where the discharged base powder needs to go. If an existing conveyor receives powder at the tower base, both parties confirm the connection between the tower outlet and that conveyor. If cooled and screened powder is sent to a base powder silo, the route is checked stage by stage - receiving, cooling, screening and conveying - to decide what can be retained, what must be added and where the new and existing equipment meet.

The quotation can list Meibao-supplied equipment and customer-supplied or retained equipment separately, with the connection points and responsibilities of each party stated. The extent of installation guidance and commissioning support can be confirmed at the same time.

Process stage Equipment that can be configured Items to confirm for selection and quotation
Slurry feeding and atomization High-pressure slurry pumps, feed piping, spray guns and nozzles. Select the pump set and nozzle based on slurry flow rate, temperature, solids content and viscosity. If an existing high-pressure pump is to be retained, provide its actual flow rate and pump outlet pressure when handling this slurry, so the pump set can be checked against the selected nozzle's feed requirement.
Spray drying Spray drying tower and associated components. Size the tower based on water evaporation rate and target base powder specifications, and verify installation and maintenance space against the plant clear height.
Hot air supply Hot air furnace, hot air ducting and connection parts. Select the heat source based on the required heat load and locally available fuel. When retaining an existing hot air furnace, verify the actual hot air temperature and airflow rate it can provide.
Tower exhaust treatment Cyclone separator, induced draft fan and downstream dedusting equipment. Select equipment based on exhaust conditions and local discharge requirements. When using wet dedusting, also confirm site water supply and scrubber liquid handling conditions.
Base powder cooling and conveying Powder receiving belt, airlift cooling equipment, gas-solid separation equipment and vibrating screen. Based on conveying distance, receiving point and post-blending line layout, confirm the equipment needed from the tower base to the base powder delivery point.
Base powder discharge and belt conveyor beneath a stainless steel hopper in a detergent powder plant

Base powder discharge and belt conveyor in a detergent powder plant.

From Slurry to Base Powder

Typical detergent powder spray drying process from prepared slurry through the spray tower to base powder, with hot air supply and exhaust treatment

Typical detergent powder spray drying process.

In Meibao's typical counter-current tower, hot air enters the lower section and meets the droplets moving downward. Water evaporates as they descend; base powder leaves the tower bottom, while exhaust carrying water vapor and fine powder exits from the top.

Where airlift cooling is used, powder from the tower-base belt cools during pneumatic conveying. After gas-solid separation it passes a vibrating screen and enters the base powder silo for post-blending. The separated airlift exhaust can be collected and dedusted separately.

A cyclone can recover dry fines from the tower exhaust. Where wet scrubbing is required, a downstream scrubber treats the exhaust gas. The process design determines where the recovered fines return to production. With wet dedusting, circulation, reuse and discharge of the scrubber liquid follow site water conditions and local discharge requirements.

How Tower Capacity Is Determined

Capacity follows the required slurry throughput and evaporation load, not finished powder output alone.

If a project is planned around daily finished detergent output, Meibao first estimates the hourly base powder required by the post-blending section from the daily operating hours and the share of base powder in the formulation. The required slurry feed rate and the water to be evaporated are then calculated using the fines reuse method, the solids content of the slurry entering the tower and the target moisture content of the discharged base powder. These figures determine the tower body and hot air system.

At the same base powder output and discharge moisture content, a lower slurry solids content means more water to evaporate each hour and a larger heat supply. Two lines with the same finished powder output can therefore require different towers and hot air systems.

Share the target output as base powder or finished post-blended powder, together with daily operating hours, so the same capacity basis is used throughout the discussion.

Cuba Detergent Powder Production Line

Meibao built a complete detergent powder production line in Cuba with a capacity of 10 t/h of finished detergent powder.

The line includes slurry preparation, spray drying, post-blending and packaging.In the spray drying section, a high-pressure slurry pump feeds the spray gun, and a belt at the tower base receives the discharged base powder and transfers it to the airlift system.

Whole-Line Scope

Slurry preparation, spray drying, post-blending and packaging in one 10 t/h project.

Spray Drying Section

A high-pressure slurry pump feeds the spray gun; the tower discharges base powder to the belt below.

Downstream Flow

The tower-base belt transfers base powder into the airlift system for cooling and conveying.

SUCHEL TBV detergent plant building housing the spray drying tower in Cuba

The SUCHEL TBV plant building in Cuba.

What to Prepare for an Inquiry

The first round sets the capacity basis; the second confirms equipment selection.

Stage Information to provide
Initial inquiry Project location, new build or retrofit, and target output in t/h or t/d, stating whether the figure refers to base powder or finished post-blended powder. When planning by daily output, include the planned operating hours per day. If only a finished powder target is available at this stage, the solution can still be discussed on that basis.
Further selection If technical data is available, add slurry solids content and viscosity, target base powder moisture content and bulk density, locally available fuel, plant clear height and the floor plan. For a retrofit, list the equipment you wish to retain and provide nameplate data and actual operating figures so Meibao can assess reusability and define the quotation scope.

Frequently Asked Questions

What does the spray drying tower deliver?
It dries prepared detergent slurry into base powder for cooling, screening and post-blending. The tower is sized to the target base powder output and the associated slurry and evaporation load.
Can the tower connect to equipment I already have?
Yes. Meibao reviews the plant space and the condition of existing equipment, confirms where the slurry enters and where the base powder is delivered, and states the connection points and responsibilities in the quotation. For a retrofit, share nameplate data and actual operating figures for the equipment you wish to retain.
How is tower capacity determined?
Meibao estimates the hourly base powder requirement from the daily finished detergent target, planned operating hours and proportion of base powder in the formulation. At the same base powder output, a lower slurry solids content means more water to evaporate and a larger heat supply.
What information is needed for a quotation?
Provide the project location, new build or retrofit, target output in t/h or t/d and whether it refers to base powder or finished powder, plus daily operating hours. For detailed selection, add slurry solids content and viscosity, target base powder moisture and bulk density, available fuel, plant clear height and floor plan.

Request a Spray Drying Tower Proposal

Tell us the project location, whether it is a new line or a retrofit, and the target output with its capacity basis. Meibao can then define the tower and hot air system together with the supply scope and connection points.

 

Hot Tags: washing powder spray drying tower, China washing powder spray drying tower manufacturers, suppliers, factory, high efficient tower spray washing powder production turnkey line, Washing Powder Making Processing Line, Turnkey Project Detergent Powder Production Line, Laundry Powder Production Line, High Speed Detergent Powder Production Line, Enviromental Tower Process Detergent Powder Production Plant

Send Inquiry